SGR Type SiC Heating Elements
The SCR (SGR, SEU) type double-spiral silicon carbide heating
elements are cut in a way that positions both electrical
terminations at the same end of the element. They are furnished
with the terminal assembly already attached. The design or
dimensions of the SGR (SCR) type Torch Furnace silicon carbide make
it impossible to conduct wiring from both sides of the furnace.
This particular type is highly suitable for blind holes, and it can
function at an operating temperature of up to 1500 degrees Celsius.
Features:
- Exhibits high temperature resistance, along with resistance to
oxidation and corrosion.
- Enables rapid heating, has a long service life, experiences minimal
deformation at high temperatures, and is convenient for
installation and maintenance.
- Equipped with an automatic electronic control system, it can
achieve precision constant temperature and also obtain curve
temperature control based on production requirements.
When Ordering SCR (SGR, SEU) Type Silicon Carbide Heating Rod, the
following information is required:
Type: SCR
Outer Diameter (OD): mm
Hot Zone Length (HZ): mm
Cold End Length (CZ): mm
Overall Length (OL): mm
Example:
SCR, OD = 31.7mm, HZ = 305mm, CZ = 241mm, OL = 546mm, Resistance
4.46 ohms
Specification should be provided as: SCR, 31.7/305/546/4.46 ohms
| Shape | U, W, Straight |
| Heating Zone | Single, Dual |
| Package | Wooden Case or Customized |
| Max Temperature | 1600°C |
| Diameter | 8mm, 12mm, 14mm, 16mm, 18mm, 20mm |
| Voltage | 220V, 380V |
